488CA Printer - User's Guide

1–8

Company confidential. Genie User’s Guide, Edition 2, First Draft . Freeze Status: open

This is the blue on page 1–8 (seq: 24)

This is the black on page 1–8 (seq: 24)

Task 3: Position the printer

If you have fitted the optional legs assembly, this task does not apply.

If you have not fitted the optional legs kit, position the printer as shown below.

For operating temperature and humidity, see page 10–5.

Allow enough space above the printer to open the cover.

Level surface and sturdy sup-

port. For printer weights, see

page 10–4.

Place the printer at the edge of

the support, so that sheets exit

without hitting the top of the

support.

Leave enough space for your largest sheet size

to hang freely from the media exit slot without

touching the ground.

If the printer is without legs ...

Localization Note.

Setting up your printer

Task 3: Position the printer