HP DesignJet 430/450C/488CA Printer - User's Guide

8–6
Company confidential. Genie User’s Guide, Edition 2, First Draft . Freeze Status: open
This is the blue on page 8–6 (seq: 134)
This is the black on page 8–6 (seq: 134)
Lights Explanation and Action
The current Print Quality selection is Fast,
Normal, or Best, depending on which of
these lights is on.
See page 2–8.
The current media selection is Paper,
Film, Coated, or Glossy, depending on
which of these lights is on.
For an explanation of which media types
this means, see page 2–3.
The printer is currently set for roll media,
rather than sheet media.
See page 2–7 for more information.
If the Ready light is off, the printer is
waiting for you to cut the roll after the last
print.
In this case, press Form Feed to cut the
roll.
The printer is currently set for sheet
media, rather than roll media.
See page 2–7 for more information.
FAST
NORMAL
BEST
This is the green on page 8–6
(seq: 134)
Print quality group
Front-panel lights
PAPER
FILM
COATED
GLOSSY
This is the green on page 8–6
(seq: 134)
Media type group
ROLL
READY
Localization Note.
This is the green on page 8–6
(seq: 134)
Media source
group
SHEET
This is the green on page 8–6
(seq: 134)
Localization Note.