HP Designjet Scanner - Users Manual

how do I install printer and drivers?
local connection through USB interface...
This option is for the Designjet 800 and the Designjet T1100
printer models. If you are connecting one of these models with
your system, then it is highly recommended to use the usb
interface as driver installation and detection by the software is
then automatic.
Use the
Firewire interface method with a Designjet 4500 printer
model.
Other models will need to use the
network connection method.
1. Power OFF alle device components - scanner, printer and
panel PC.
2. Connect the USB cable's printer end to the printer.
3. Connect the USB cable's other end to the panel PC.
4. Power On the printer, scanner and panel PC.
5. The printer driver is preinstalled in the software and the
printer will be detected at power on.
6. Control setup - Check that your printer profile
corresponds with the printer you selected. Press Setup
Tab>Printer>Tool button>Printer Setup. The "Printer
Profile" option should be checked and the box text should
show the attached HP Desginjet 820 mfp printer name.
file:///C|/Documents%20and%20Settings/bfm/Desktop/HP%2...at%20-%20all%20languages/English/4500/html/djcc-79.htm (2 of 3)28-11-2007 12:14:08
176