HP Designjet Printers - Security Features

HP Designjet Printer Series Security Settings
12
This option can be enabled from the T1200 Embedded Web server as shown below:
The following table shows the different levels access and what they enable or disable:
Retrieve Job
Information
Paper handling
Configure Designjet
Diagnostics
Maximum OK ---- ---- ---- ----
Intermediate OK OK ---- ---- ----
Moderate OK OK OK ---- ----
Minimum OK OK OK OK OK
• Maximum Lock – This option denies access to all options.
• Intermediate Lock – This option denies access to the paper and ink supplies handling options,
maintenance options and demo prints, on top of the Moderate Lock. Only viewing printer and
supplies information is allowed.
• Moderate Lock – This option denies access to all printer settings, the job queue, information and
service prints and the printer log, on top of Minimum Lock.
• Minimum Lock – This option denies access to the Resets options, Enable/Disable connectivity
options and the Service Menu.
Note: With the Moderate or Maximum locks set you will not able to load/unload paper or replace
printheads/ink cartridges without first unlocking the front panel, and so these options should only be set in
specific circumstances where the implications are known and understood.