HP Designjet 4020 and 4520 Printer Series - User's Guide: English

The front panel displays that the stacker is disconnected
If the front panel constantly or intermittently claims that the stacker is disconnected from the printer,
there may be a problem with the height of the stacker. Use the following procedure to adjust the height
of the stacker.
1. Using an hexagonal wrench, loosen the upper hexagonal nut on both of the stacker's wheels that
are closest to the printer.
2. Adjust the height of the stacker by rotating the lower hexagonal nut clockwise or anti-clockwise.
ENWW The front panel displays that the stacker is disconnected 173
Stacker problems