HP Designjet 4500 Series - User Guide

1. Insert each printhead cleaner into the correct color slot location, in the service station, in the
direction indicated by the arrow shown here.
2. When the printhead cleaner has been pushed all the way in, press inwards and downwards as
indicated by the arrow shown here, until it clicks into place.
If you have difficulty, see I cannot insert a printhead cleaner.
NOTE The front panel will not show the new printhead cleaner until the right-hand door
is closed.
3. When you have inserted the printhead cleaner(s) into the printer, close the door.
NOTE The printer needs all the ink cartridges, printheads, and printhead cleaners to be
installed before it can continue.
4. If no paper is loaded, the front panel will instruct you to load some.
ENWW Insert a printhead cleaner 191
How do I... (ink system
topics)