HP Designjet 4500 Series - User Guide

5. Select File > Print.
●
Printer Engine: select Windows Printer (it will use the selected raster driver).
●
Output Image Quality (Resample Ratio): this setting alters the number of pixels sampled
when an ArcMap print file is generated; it determines how many pixels in the map
document will be used to create the file sent to the printer.
●
Fast = 1:5
●
Normal = 1:3
●
Best = 1:1 (as is)
The 'Best' choice requires a lot of resources to process the print job, and could cause long
processing times and perhaps out–of–memory messages, depending on the map size. If
you have these problems, select an Output Image Quality lower than 'Best'. Bear in mind
that you will gain no advantage in print quality by sending an image whose resolution is
higher than the printer's input resolution.
6. You can print now (click the OK button).
Printing with the ArcPress printer engine
1. You must have the driver you need installed, although it will function only as a port.
2. When you are ready to print, select File > Page and Print Setup, select the driver (the driver
settings have no effect), and click the OK button.
3. Select File > Print.
●
Printer Engine: select ArcPress.
170 Chapter 10 How do I... (color topics) ENWW
How do I... (color topics)