HP DesignJet 3000/3500 CP Printer User's Guide - C4724-90051

Welcome
A Five-Minute Guide To Your Printer
1-6
Media
You can print on roll media or sheet media up to 54 inches wide (1370mm). HP
rolls of media come in 24inches (609.mm), 36 inches (914.mm), 42 inches
(1066mm) and the largest size 54 inches (1370mm).
The following media types are supported for HP DesignJet CP Ink (imaging ink)
which is high image quality for indoor use:
■ Coated paper
■ Heavyweight coated paper
■ High-gloss photo paper
■ Semi-gloss photo paper
■ Imaging film-Backlit
■ Opaque vinyl
For detailed information on Hewlett-Packard media, see pages 3-4 of this manual
and the Media Guide for the HP DesignJet CP Printers provided with your printer.
The following media types are supported for HP DesignJet CP Ink UV
(UVPigmented Ink)
■ HP Heavyweight Coated paper
■ Opaque Vinyl
User Interface
The printer’s front panel includes an easy-to-use interface with a two-line display,
giving you access to a comprehensive set of printer functions and to a number of
useful internal prints. See Chapter 2, Using the Front Panel, for a short tutorial to
teach you how to navigate through the menus and a description of internal prints.
Standby Mode
The printer has a standby mode where, after 15 minutes of inactivity, the printer
goes into a sleep mode (low-power usage mode). The printer “wakes up” whenever
you press the Standby button on the printer or there is any I/O activity such as
receipt of a file. See page1-9, Front View of Printer, for the switch location and
page 2-6, Standby Mode, for more information about this function.