HP Designjet 330 and 350C Plotters - Users Guide
This is the yellow on page 5–7 (seq: 99)
This is the magenta on page 5–7 (seq: 99)
5–7
Company confidential. Pelican User’s Guide, Ed 1, Final. Freeze Status: frozen
This is the cyan on page 5–7 (seq: 99)
This is the black on page 5–7 (seq: 99)
Using the Color Cartridge Test Sheet
Some of the circumstances in which it is useful to use the Color Cartridge Test
Sheet are explained in chapter 9,“Troubleshooting”. It achieves two objectives:
It tells you which cartridge, if any, is not performing correctly.
It lets you check the alignment of the four cartridges to each other and, if
necessary, adjust it.
1
Load a sheet of A-size or A4-size plain paper, in portrait orientation.
Make sure you have selected
Plain as the media type on the front panel
(see page 2–3). For this plot, the plotter sets the print quality level
automatically.
For help on how to load a sheet, either refer to the pictures on the
right-hand side of the plotter’s media-entry slot, or see the section starting
on page 2–9. Note that you cannot print the Color Cartridge Test Sheet on
roll media. To load a sheet with the the roll-feed option installed, see page
2–26.
Plot will be on underside.
1750
350C
Localization Note. JKCT: This page very similar to Parrot UG p3-7.
INTERNAL
5
PLOTS
Special internal plots
Using the Color Cartridge Test Sheet