HP Designjet 330 and 350C Plotters - Users Guide

4–3
Company confidential. Pelican User’s Guide, Ed 1, Final. Freeze Status: frozen
This is the cyan on page 4–3 (seq: 91)
This is the black on page 4–3 (seq: 91)
To advance the media
Pressing the Form Feed key advances
the media out of the media exit slot.
Form Feed
You may want to do this:
when the plotter is in Continuous Plotting mode, you have reached the end of a
series of plots and want to cut the roll after the last one (see page 2–31), or
to eject damaged media after clearing a media jam (see page 9–5).
There is no need to use
Form Feed to unload a plotted sheet from the plotter – see
page 2–28.
Don’t press
Form Feed while a file is being received by the plotter, as this
terminates the data transmission (unless you are doing this as part of a
troubleshooting routine – see page 9–9).
PLOT
4
MANAGEMENT
Localization Note. Treat as new.
Managing your plots
To advance the media