HP Designjet 330 and 350C Plotters - Users Guide

2–7
Company confidential. Pelican User’s Guide, Ed 1, Final. Freeze Status: frozen
This is the cyan on page 2–7 (seq: 47)
This is the black on page 2–7 (seq: 47)
Before loading media
Roll/Sheet
Specify whether you are going to
load a sheet or a roll
On the front panel, if the
Roll light on,
the plotter believes you are loading a
roll. If it is off, it believes you are
loading a sheet.
To toggle between the two settings,
press the
Roll/Sheet key.
Roll
Before sending your file
1
Media
Type
Specify the media type
Press the
Media Type key until the
light comes on against the name of the
media type you are going to load. For
an explanation of which media type
category on the front panel should be
used for each supported media type,
see the table on page 2–3.
To select Glossy, press the Media Type key until both the
Film and Coated lights are on.
350C
Note that, if your software printer driver allows you specify media type, you must
specify it correctly there as well.
Working with media
Before loading media / Before sending your file
Localization Note. .Treat as new.
MEDIA
2