HP Designjet 10000s Printer series - User's Guide

5. When the printing on the top side completes, two additional lines are printed. The first is a solid line

(2) which is used as a guide to align the print position between the top side and the back; the second

line is a dashed line (1) to use as a cutting guideline.

6. Once the printing has completed, feed enough media out of the printer and cut the media along the

dashed line.

7. With a suitable marker put guide marks (2) on the edges of the back of the media (3), where the edges

are intersected by the solid line (1).

ENWW Printing on the back of the media from the take-up reel (without relocating from take-

up side)

147

How do I perform double-sided

rintin