- Hewlett-Packard Printer User Manual

USER GUIDE FOR HP 6 COLOR PLUGIN
AG50324 Rev. 7 27
11.3 Creating color setups
Using the Color Setup Manager (Figure 14) and the options that are available in the New Color Setup dialog
(Figure 15), you can add your own color setups to specify precisely how you want the colors in your jobs to be
processed.
The plugin already contains color setups which are invoked when a ProofReady profile (or a calibration profile
in a pre-Eclipse RIP) is selected in a page setup. For most purposes these color setups are perfectly adequate and
will give excellent results. However, if you wish to create your own color setups and use them instead, follow
the steps below.
To create a color setup in the RIP, do the following:
1. Select Color > Color Setup Manager to open the Color Setup Manager (Figure 14).
Figure 14 The Color Setup Manager
2. Select the manager options as follows:
Device: Select from the drop-down list the HP device you want the new color setup to be used with.
Color Space: Select from the drop-down list the color space you want the color setup to be used with.
3. Click New ‘ColorPro’ Setup to open the New Color Setup dialog (Figure 15).
Figure 15 The New Color Setup dialog (Eclipse Release)