HP DDS/DAT tape drives UNIX, Linux and OpenVMS configuration guide (DW049-90930, May 2010)
4. When you have exited sam, run ioscan to see the tape drive:
%/sbin/ioscan -fnC tape
All default device files displayed have compression enabled.
NOTE:
HP recommends the ‘Berkeley’ device files of most applications:
nl
cXtYdZBESTnb = Berkeley, no rewind, best available density
nl
cXtYdZBESTb = Berkeley, with rewind, best available density
nl
where:
nl
X = card number
nl
Y = target number
nl
Z = LUN number
For HP-UX 11i v3 (HP-UX 11.31)
1. Start up the SMH web-based interface:
% smh –w
This will attempt to launch a web browser. Mozilla browser
4
is the default when HP-UX 11i v3
is installed.
2. From the SMH Tools page (see Figure 3 on page 11), select Manage Peripheral Devices from
the Peripheral Devices section.
3. Select tape from the Class drop-down box on the HP-UX Peripheral Device Tool page. Select the
tape device (radio button) requiring device files from the resulting list. If device files are not
already present this will be indicated under the Properties header (see Figure 5)
5
.
Figure 5 Selecting a tape device to create its device files (Agile View)
.
4. From the right-hand panel on the HP-UX Peripheral Device Tool page, click on Reinstall Device
Files. At the next page, click the Reinstall button. When the browser returns to the HP-UX Peripheral
Device Tool page, click the Refresh button one or more times until the list of device files appears
under the Properties header.
4
If Mozilla is being invoked for the first time you may be asked to agree to license terms for the software.
5
Depending on how SMH was last used the HP-UX Peripheral Device Tool page will display either the Agile View or the Legacy
View as described at the beginning of this chapter. To switch between these views use the Toggle Global Device View link on
the right hand side of the HP-UX Peripheral Device Tool page. In this chapter, the Agile View is assumed. The process is similar
for the Legacy View.
UNIX, Linux and OpenVMS configuration guide 13