HP StorageWorks DAT USB Tape Drives User Guide (DW049-90916, June 2010)

3. power cable1. USB cable (pre-fitted)
2. on/off switch, make sure it is in the OFF position (O side down)
Figure 15 Connecting power and USB cables, all other models
.
2. Plug the USB cable into the USB connector on the server.
NOTE:
It is important to ensure that you connect your drive to a USB 2.0 port. The drive will work
on a USB 1.1 port but performance will be severely degraded. See also
“Verifying USB installation for optimum performance” on page 63.
DAT USB Tape Drives 33