HP StorageWorks D2D Backup System User Guide (EH880-90950, October 2007)

• Anonymous Authentication (anyone can log on, you do not need to provide a Username and

Password when you conﬁgure email alerts)

• Basic Auth e ntication , where a user name and p assword are required and should be provided

when you conﬁgure email alerts

NOTE:

Integrated Windows Authentication is not supported with the HP D2D Backup System.

If your SMTP Server requires this form of authentication and you have a spare network

port, we recommend that you create a new virtual SMTP server, allowing connection only

to the HP D2D Backup System. In this instance, you may lock the SMTP server to use

only the HP D2D Backup System’s IP address and authentication may safely be set to

anonymous for the dedicated SMTP server.

Disk & RAID (Status)

This page provides information about the R A ID status, disk usage and status of the physical disks.

Use it to identify disks that may be failing or disks that are approaching capacity.

RAID status

In normal operation, this shows green, OK.

Ifoneormoredisksfail,itshowsawarningicon.

Disk usage

This section shows you how much disk space has been used.

Total Disk Usage: The green area is the amount of disk space commit ted. This always shows

some value because it includes the default 2 G B space committed for each cartridge slot (see

“Consider ations when conﬁguring cartridges and slots”onpage19).

The Web Management Interface