HP StorageWorks D2D Backup System User Guide (EH880-90950, October 2007)

Bound Volumes/Devices tab
No configuration is required on the Bound Volumes/Devices tab.
Linux iSCSI initiator
An iSCS
I initiator is embedded in the operating system. Please refer to the “Linux Configuration Guide”
on the H
P StorageWorks Tape CD-ROM for instructions on using it. Make sure that you hav e downloaded
the lat
est operating system patches before you configure your system.
Manual driver installation
Two drivers are required; an HP LTO Tape driver and a medium changer driver.
NOTE:
Certain backup applications require you to use their own drivers for both the tape device and m edium
changer. For many applications these will be installed automatically during the soft ware installation
process. If the backup software is already installed, you may ne ed to manual ly update the drivers after
installing the HP D2D Backup System.
D2D Backup System
51