HP StorageWorks D2200sb PCIe Storage Blade Maintenance and Service Guide

Removal and replacement procedures 26
The drive drawer and cable spool are not shown for clarity.
7. Place the module in a static-free environment.
When the service procedures are complete, install the module by reversing the removal procedure.
Remove the access panel
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, properly ground the server blade
before beginning any installation procedure. Improper grounding can cause ESD.
CAUTION:
Do not operate the storage blade with the access panel open or removed. Operating
the storage blade
in this manner results in improper airflow and improper cooling that can lead
to thermal damage.
To remove the component:
1. Power down the partner server blade (on page 22).
2. Remove the storage blade (on page 22).
3. Press the access panel release button.
4. Slide the access panel toward the rear of the storage blade.
5. Remove the access panel.
Install the access panel
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, properly ground the server blade
before beginning any installation procedure. Improper grounding can cause ESD.