HP Color LaserJet CP5220 Series - Software Technical Reference

Table 4-12 Page orientation
Orientation (Finishing tab) Flip Pages Up selected Flip Pages Up not selected
Portrait Short-edge binding Long-edge binding
Landscape Long-edge binding Short-edge binding
When Print on Both Sides is selected, the document preview image changes to show a spiral binding
along either the left edge or the top edge of the page. In addition, a folded-over corner appears in the
lower-right portion of the preview image, indicating that printing occurs on the back side. An arrow on
the folded-over corner points in the direction that the pages would be flipped if they were bound together.
Short-side binding is for print jobs with pages that read by flipping over like the pages of a calendar.
Long-side binding is for print jobs with pages that read by turning like the pages of a book.
Booklet layout drop-down menu
The Booklet Layout drop-down menu, visible when Print on Both Sides is selected, offers choices
that are based on the current paper size. The default setting for the Booklet Layout drop-down menu
is Off.
●
Left Binding
●
Right Binding
By selecting Left Binding or Right Binding, the document preview image changes to show the location
of the binding. If the Pages per Sheet setting is on the default setting of 1, it automatically changes to
2 pages per sheet. Manually changing the Pages per Sheet setting to 4, 6, 9, or 16 pages per sheet
disables the booklet setting. See the
Printing a booklet on page 195 section of this chapter for more
information.
Book and booklet printing
A book is a print job consisting of at least two pages that can have a different paper type for the front
cover, first page, other pages, last page, or back cover. Use the Front Cover, First Page, Other
Pages, Last Page, and Back Cover settings on the Paper/Quality tab (available by selecting the Use
Different Paper/Covers check box) to select different paper for these pages.
A booklet is a print job that places two pages on each side of a sheet that can be folded into a booklet
that is half the size of the paper type. Use the Booklet Layout drop-down menu on the Finishing tab
to control booklet settings.
Printing a booklet
Complete the following steps to print a booklet.
1. In the Finishing tab, select the Print on Both Sides check box.
2. In the Booklet Layout drop-down menu, select the preferred type of booklet printing (for example,
Right Edge Binding).
3. Click OK in the print driver.
4. Click OK in the Print dialog box to print.
ENWW Finishing tab features 195