HP Color LaserJet CP5220 Series - Software Technical Reference

●
Scale to Fit option
●
% of actual size setting
Figure 4-16 Effects tab – Resizing Options group box
Actual Size setting
Actual Size is the default setting. It prints the document without changing the document size.
Print Document On setting
Select the Print Document On option button to format the document for one paper size and then print
the document on a different paper size, with or without scaling the image to fit the new paper size.
The Print Document On control is disabled by either of the following conditions:
●
The % of actual size value is not 100.
●
The Pages per Sheet value (on the Finishing tab) is not 1.
When Print Document On is selected, the drop-down menu shows the paper sizes on which you can
print. The list contains all of the standard paper sizes that are supported by the selected paper source
and any custom sizes that have been created. When Print Document On is selected, Scale to Fit is
automatically selected. Clear this check ox if you do not want the document reduced or enlarged to fit
on the selected paper.
Scale to Fit option
The Scale to Fit option box specifies whether each formatted document page image is scaled to fit the
target paper size. By default, Scale to Fit is selected when Print Document On is selected. If the setting
is turned off, then the document page images will not be scaled, and are instead centered at full size
on the target paper. If the document size is larger than the target paper size, then the document image
is clipped. If it is smaller, then it is centered within the target paper. The following illustration shows
184 Chapter 4 HP PCL 6 print driver and HP UPD PS for Windows ENWW