HP Color LaserJet CP5220 Series - Software Technical Reference

Tray 1 and Tray 2 Dimensions
1
Weight Capacity
2
HP LaserJet glossy paper and
HP LaserJet photo paper
Same as the preceding listed
minimum and maximum
sizes.
75 to 220 g/m
2
(20 to 58 lb)
Single sheet of HP LaserJet
glossy paper or HP LaserJet
photo paper for Tray 1
Up to 25 mm (0.99 inch) stack
height for Tray 2
HP Premium Cover Paper
4
200 g/m
2
(53 lb) cover
Single sheet of HP Cover
paper for Tray 1
Up to 25 mm (0.99 inch) stack
height for Tray 2
Transparencies and opaque
film
Thickness: 0.10 to 0.13 mm
(3.9 to 5.1 mils)
Single sheet of transparency
or opaque film for Tray 1
Up to 50 sheets for Tray 2
Labels
3
Thickness: up to 0.23 mm (up
to 9 mils)
Single sheet of labels for Tray
1
Up to 25 mm (0.99 inch) stack
height for Tray 2
Envelopes
Up to 90 g/m
2
(up to 24 lb)
Single envelope for Tray 1
Up to ten envelopes for Tray 2
1
The product supports a wide range of standard and custom sizes of paper. Check the print driver for supported sizes.
2
Capacity can vary depending on paper weight and thickness, and environmental conditions.
3
Smoothness: 100 to 250 (Sheffield).
4
Hewlett-Packard does not guarantee results when printing with other types of heavy paper.
Paper source:
The Paper source: setting specifies the source tray to use for printing a document. The list of source
trays depends on the product accessories that are installed. Any optional source trays that are installed
through the Device Settings tab also appear here.
The Paper source: drop-down menu can contain the following options:
●
Automatically Select
●
Printer auto select
●
Manual Feed in Tray 1
●
Tray 1
●
Tray 2
●
Tray 3
The default setting is Automatically Select. When this is selected, the HP Color LaserJet CP5220
Series printer uses the source tray that supports the selected paper size. For the other options, make
sure the correct paper size is loaded in the source tray.
Table 4-9 Tray 1 and Tray 2 specifications (continued)
ENWW Paper/Quality tab features 177