HP Color LaserJet Enterprise CP4020/CP4520 Series Printer - Software Technical Reference (External)

◦
Rough
◦
HP Tough Paper
◦
Opaque Film
The default setting is Unspecified.
No mechanism exists for manually adding custom paper types through the driver. Use HP Web Jetadmin
to add custom paper types. Custom types can be added only by using bidirectional communication, so
they must already exist in the product when the bidirectional query occurs. If bidirectional communication
is enabled, then an updated list of paper types is returned. If bidirectional communication is not enabled,
then the driver looks for custom paper types that have been saved from a previous bidirectional
communication query, and uses those. Otherwise, no custom paper types are available through the
driver.
NOTE: To download a current version of HP Web Jetamin and for the latest list of supported host
systems, go to the following Web site:
www.hp.com/go/webjetadmin
If you select a setting other than the default, make sure that the correct paper type is loaded in the tray
that you selected in the Paper source setting. For more information about paper types, see
Media
attributes and commands on page 219 .
When you change the print-driver setting to a paper type that is not currently loaded in the product, a
control-panel message appears that prompts you to load the paper type or select another tray.
Special pages
To specify special pages to be used, click the Settings button under Special Pages.
Covers
To use specific cover settings, click Covers in the Special Pages group box.
Use the Covers options to include a blank or preprinted cover on a document, or to include a front/back
cover from a source tray that is different from the one used for the remainder of the document.
The following are the Covers options:
●
Add a blank or preprinted cover: Select which cover is customized: Front, Back, or Both.
●
Paper source: The Paper source setting specifies the source tray to use for adding a front and/
or back cover to the document. The list of source trays depends on the accessories that are
installed. Any optional trays that are installed through the Device Settings tab also appear here.
●
Paper type: The Paper type setting specifies the paper size to use for front and/or back covers.
Changes made to the Paper type setting here override any previous Paper type settings using
the same paper source.
NOTE: The same size of paper will be used for the entire print job.
When you change the type and source of the paper and covers, the settings remain configured until you
close the software program.
122 Chapter 4 HP PCL 6 print driver and HP PS Universal Print Driver for Windows ENWW