HP Color LaserJet CP4005 Printer - Software Technical Reference (external)

Send Ctrl-D Before Each Job
This control specifies whether the printer is reset at the beginning of every postscript document. The
default setting is No. Pressing Ctrl-D resets the printer to its default setting to ensure that previous print
jobs do not affect the current print job. Using Ctrl-D might cause a print job to fail if the printer is connected
through a network. If the document fails to print when sent to a printer connected through serial ports,
change No to Yes.
Send Ctrl-D After Each Job
This control specifies whether the printer is reset at the end of every postscript document. The default
setting is Yes. Pressing Ctrl-D resets the printer to its default setting to ensure that future print jobs are
not affected by the current print job. Using Ctrl-D might cause a print job to fail if the printer is connected
through a network. If the document fails to print when sent to a network printer, change Yes to No.
Convert Gray Text to PostScript Gray
This control specifies whether to convert the true gray value (RGB) in text to the gray that the driver
provides. The following settings are available:
●
Yes
●
No (default)
Convert Gray Graphics to PostScript Gray
This control specifies whether to convert the true gray value (RGB) in graphics to the gray provided by
the driver. The following settings are available:
●
Yes
●
No (default)
Add Euro Currency Symbol to PostScript Fonts
This control specifies whether to add the euro symbol to the printer fonts. The following settings are
available:
●
Yes (default)
●
No
Job Timeout
This control specifies how long the document can take to get from the computer to the printer before
the printer stops trying to print the document. If you specify 0 seconds, the printer continues trying to
print indefinitely. The default setting is 0 seconds. Use the spin box to change this value, up to a
maximum of 32,767 seconds.
Wait Timeout
This control specifies how long the printer waits to get more postscript information from the computer.
After the specified time passes, the printer stops trying to print the document and prints an error
message. When printing a very complicated document, increase this value. If you specify 0 seconds,
the printer waits indefinitely. The default setting is 300 seconds. Use the spin box to change this value,
up to a maximum of 32,767 seconds.
ENWW Device Settings tab features 181
HP drivers for Windows