HP Color LaserJet CP3525 Series Printers - User Guide

7. Holding the DIMM by the edges, align the notch on the DIMM with the bar in the DIMM slot at an
angle and firmly press the DIMM into the slot until it is fully seated. When installed correctly, the
metal contacts are not visible.
XO
XO
XO
XOXO
XO
XOXOXOXOXO
XO
X
O
XOX
OXOX
O
XO
XO
X
OX
O
XO
XOXOXOXOX
O
XOXOXOX
OXO
XOXOXOXOXO
XO
XOXO
XOXO
XO
XOXOXO
XOXOXO
XOXOXO
XOXOXO
XOXOXO
XOXOXO
XOXOXO
XOXOXO
XOXOXO
XOXO
XO
XOXOXO
XOXOX
OXO
XOXO
XO
XOXO
XO
XOXOXO
8. Push down on the DIMM until both latches engage the DIMM.
XO
X
OXO
XOXOXO
XOX
O
X
OXOX
OXO
XOX
O
X
OXOXOXO
XOXO
XOX
OXO
XO
XOXO
XO
XOXO
XO
XOXO
XO
XOXO
XO
XOXO
XO
XOXO
XO
XOXO
XO
XOXO
XO
XOXO
XO
X
OXO
XOX
O
XO
XO
XOXO
XO
XOX
OXO
XOX
OXO
XOX
O
XO
XIOXIOXIXO
OXIXO
XIOXIO
XIOXIOXIXO
OXIXO
XIOXIO
XIOXIOXIXO
OXIXO
XIOXIO
XIOXIO
XIXO
OXIXO
XIOXIO
NOTE: If you have difficulty inserting the DIMM, make sure the notch on the bottom of the DIMM
is aligned with the bar in the slot. If the DIMM still does not go in, make sure you are using the
correct type of DIMM.
9. Align the formatter board in the tracks at the bottom of the slot, and then slide the board back into
the product.
NOTE: To prevent damage to the formatter board, ensure the formatter board is aligned in the
tracks at the top and the bottom of the opening.
ENWW Replace supplies 151