HP PCL/PJL reference (PCL 5 Color) - Technical Reference Manual

EN Index-5
Set Pattern Reference Point command
5-33, 5-43
shaded fill
pattern selection 5-29
patterns 5-30
short form CID command B-15
Simple Color command 2-3, B-4
simple color mode 2-1, 2-3, B-2, B-4
source image 5-2
source raster height command 6-13
source raster width command 6-15
source transparency mode 5-2
Source Transparency Mode command
5-7
SP 6-13
sRGB color space 1-4
Start Raster Graphics command 6-17
T
Tagged Image File Format (TIFF)
Encoding (raster compression)
6-21
texture 5-2
TIFF
adaptive compression 6-29, 6-31
raster graphics compression 6-20
Transfer Raster Data command 6-28,
6-32, 6-33
transparency interactions and logical
operation 5-12
transparency mode 5-2
rectangular area 5-49
source 5-7
U
unencoded, adaptive compression 6-29
user-defined dithers D-6
user-defined pattern
assign ID 5-29
base pattern 5-33
data 5-38, 5-39
define pattern command 5-38
deleting 5-44
descriptor format (header) 5-38
example 5-40
header fields 5-38
introduction 5-33
Pattern Control command 5-44
permanent 5-44
reference point 5-36
selecting ID 5-29
Set Pattern Reference Point command
5-43
temporary 5-44
tiling 5-34
User-Defined Pattern command 5-38
user-defined patterns 5-33
V
Vertical Rectangle Size command
decipoints 5-47
PCL Units 5-47
viewing illuminant A-2
viewing illuminant command D-18
W
well-behaved raster 1-9
white rule 5-32
width
pixel, user-defined pattern descriptor
5-39
Y
Y offset command 6-19
Y-offset, adaptive compression 6-31
Z
zeroed rows (in raster graphics) 6-5