HP Color LaserJet 9500nand 9500hdn - User Guide

http://www.hp.com/support/lj9500

54 Chapter 4 – Improving print quality Rev. 1.0

Configuring the trays for custom-size media

Custom media sizes are sizes that do not conform to those marked in the input trays and that are not listed in the control

panel menus or in the printer driver.

Note

For tray 1.

When using custom-size media, select CUSTOM from the

Tray 1 Size

menu.

For tray 2, tray 3, and tray 4.

When using custom-size media in these trays, make sure that the custom/

standard switch in the tray is set to Custom.

Note

Printer-driver settings override control panel settings. Software application settings override both printer-

driver settings and control panel settings.

The dimensions of custom-size media must be typed at the control panel. If you are using tray 1, the

Custom

appears when you select CUSTOM from the

Tray 1 Size

menu. If you are using tray 2, tray 3, or tray 4, the

Custom

appears when you set the custom/standard switch to Custom and close the tray.

Make sure to type the X dimension and Y dimension of the media. The following illustration shows the X and Y dimensions

relative to each of the input trays. The X dimension is measured from the front of the tray to the back of the tray. The Y

dimension is measured from the left of the tray to the right of the tray.