HP PCL/PJL reference (PCL 5 Printer Language) - Technical Reference Manual Part II

23-20 The Character Group EN
CF, Character Fill Mode
The Character Fill Mode command specifies the way scalable fonts
are filled and edged; bitmap and Stick fonts cannot be edged and
can be filled only with raster fill, shading, or PCL cross-hatch
patterns. Scalable characters may be filled with any of the fill patterns
specified by the FT command (shading, hatching, cross-hatch, and
user-defined raster fill patterns).
CF fill mode[,edge pen[;] ]
or
CF [;]
z No Parameters— Defaults characters to solid fill with no edging.
Equivalent to CF0,0.
SA, Select Alternate Font
SB, Scalable or Bitmap Fonts
SD, Standard Font Definition
SI, Absolute Character Size
SR, Relative Character Size
SS, Select Standard Font
TD, Transparent Data
Table 23-7 (continued)
Parameter Format Functional Range Default
fill mode clamped
integer
0, 1, 2, or 3 0 (solid fill)
edge pen integer -(2)
30
to 2
30
- 1 0 (no edging)