HP Color LaserJet 5550 series - User Guide

Jam recovery
This option allows you to configure the printer response to paper jams, including how it
handles the pages involved. AUTO is the default value.
● AUTO—The printer automatically turns jam recovery on when sufficient memory is
available.
● ON—The printer reprints any page involved in a paper jam. Additional memory is
allocated to store the last few pages printed, and this might cause overall printer
performance to suffer.
● OFF—The printer will not reprint any page that was involved in a paper jam. Since no
memory is used to store the most recent pages, performance might be optimal.
To set jam recovery response
1. Press M ENU to enter the MENUS.
2. Press
to highlight CONFIGURE DEVICE.
3. Press
to select CONFIGURE DEVICE.
4. Press
to highlight SYSTEM SETUP.
5. Press
to select SYSTEM SETUP.
6. Press
to highlight JAM RECOVERY.
7. Press
to select JAM RECOVERY.
8. Press
or to select the appropriate setting.
9. Press
to set the selection.
10. Press M
ENU .
Language
If the control panel displays LANGUAGE in English, follow the procedure provided below.
Otherwise, turn the printer off and then back on. When XXXMB appears, press and hold
.
When all three control panel lights are lit, release
and follow the procedure provided below
to set the language.
To select language
1. When Select A Language appears in English, press , and wait until the control panel
displays LANGUAGE in English.
2. Press
until the preferred language displays.
3. Press
to save the preferred language.
ENWW Changing printer control panel configuration settings 59