HP Color LaserJet 5550 series - User Guide

Control panel message Description Recommended action
REPLACE <COLOR>
CARTRIDGE
The supplies gauge will display the
consumption levels of print
cartridges.
alternates with
To continue press
The supplies gauge will display the
consumption levels of print
cartridges.
The identified print cartridge is nearing
the end of its useful life and the
SUPPLIES LOW setting in SYSTEM
SETUP is set to STOP.
1. Order the identified print cartridge.
2. To continue printing, press
.
3. To replace the cartridge, perform
the following steps:
● Open the top cover and image
transfer unit.
CAUTION
The image transfer unit can be
easily damaged.
● Remove the identified print
cartridge.
● Install a new print cartridge.
● Close the top and front covers.
● Supplies ordering information is
also available from the
embedded Web server. See
Using the embedded Web
server for more information.
REPLACE FUSER KIT
For help press
The fuser kit has reached the end of its
life. Printing will not continue until the
fuser has been replaced.
1. Open the top cover.
2. Loosen the blue thumb screws.
3. Remove the old fuser unit.
4. Install a new fuser unit and secure
with thumb screws.
5. Close the top cover.
6. Supplies ordering information is also
available from the embedded Web
server. See
Using the embedded
Web server for more information.
REPLACE FUSER KIT
For help press
alternates with
REPLACE FUSER KIT
To continue press
The fuser is nearing the end of its useful
life and the SUPPLIES LOW setting in
SYSTEM SETUP is set to STOP.
1. Order the fuser kit.
2. To continue printing, press
.
3. To replace the fuser kit, perform the
following steps:
● Open the top cover.
● Loosen the blue thumb screws.
● Remove the old fuser unit.
● Install a new fuser unit and
secure with thumb screws.
● Close the top cover.
● Supplies ordering information is
also available from the
embedded Web server. See
Using the embedded Web
server for more information.
Control panel messages (continued)
174 Chapter 8 Problemsolving ENWW