HP Color LaserJet 5550 series - User Guide

13. Press to print the job.
Deleting a private job
A private job can be deleted from the printer control panel. You can delete a job without
printing it, or IT WILL BE AUTOMATICALLY DELETED after it is printed.
1. Press M
ENU to enter MENUS.
RETRIEVE JOB is highlighted.
2. Press
to select RETRIEVE JOB.
3. Press
to highlight your USER NAME.
4. Press
to select your USER NAME.
5. Press
to highlight a JOB NAME.
6. Press
to select the JOB NAME.
7. Press
to highlight DELETE.
8. Press
to select DELETE.
9. Press
or to select the first digit of the PIN.
10. Press
to select the digit. The number changes to an asterisk.
11. Repeat steps 9 and 10 for the remaining three digits of the PIN.
12. Press
when finished entering PIN.
13. Press
to delete the job.
Mopier mode
When Mopier Mode is enabled in the driver, the printer produces multiple, collated copies
from a single print job. Multiple-original printing (mopying) increases printer performance and
reduces network traffic by sending the job to the printer once, then storing it in the printer’s
RAM. The remainder of the copies are printed at the printer’s fastest speed. All documents
can be created, controlled, managed, and finished from the desktop, which eliminates the
extra step of using a photocopier.
The HP Color LaserJet 5550 series printers support the mopying feature, provided they have
enough total memory (at least 192 MB of total memory: 160 MB DDR plus 32 MB on the
formatter board), and the mopying feature is enabled by default if the Mopier Mode setting
is Enabled in the Device Settings tab.
ENWW Job storage features 109