HP Color LaserJet 5500 series printers - Software Technical Reference Manual

74 3 Driver features Software Technical Reference
Custom width and height control limits
The minimum paper size for the HP Color LaserJet 5500 product is 76 mm by 127 mm
(3.0 inches by 5.0 inches) and the maximum is 297 mm by 470 mm (12.05 inches by
18.5 inches). The following table summarizes paper size limits for each paper-
handling device.
Paper and envelope icons
The paper and envelope icons visually define width and height.
Measurement Units button
Like the dynamic command button previously described, the Measurement Units
button is also multi-titled, although its function is always to toggle the unit of
measurement between standard (inches) and metric (millimeters) units of
measurement.
Close button
The Close button closes the Custom Paper Size dialog box according to the logic in
the table below. In all cases, any custom paper sizes successfully saved (and not
renamed or deleted) while the dialog box is open will remain in the paper size list in
the Paper tab. The following table lists options that appear when you click the Close
button.
Table 9. Custom width and height limits for the HP Color LaserJet 5500
Media source or paper
handling accessory
Minimum size -
width by height
Maximum size -
width by height
Tray 1 (multi-purpose) 76 mm by 127 mm
(3.0 inches by 5.0 inches)
306 mm by 470 mm
(12.05 inches by 18.50 inches)
Tray 2 148 mm by 210 mm
(5.83 inches by 8.27 inches)
297 mm by 432 mm
(11.69 inches by 17.00 inches)
Tray 3 148 mm by 210 mm
(5.83 inches by 8.27 inches)
297 mm by 432 mm
(11.69 inches by 17.00 inches)
Tray 4 148 mm by 210 mm
(5.83 inches by 8.27 inches)
297 mm by 432 mm
(11.69 inches by 17.00 inches)
Table 10. Close dialog box text strings
If the drop-down menu
contains …
And the button says … Then this happens when the
Close button is clicked
Untitled Save The dialog box closes, but you lose
the changes that were not saved.
The current paper size remains the
same as it was when the Custom
button was selected.