HP Color LaserJet 4700 Printer Series - Certificate of Volatility

Hewlett-Packard Certificate of Volatility
Model: Part Number: Address: Hewlett-Packard Company
HP LJ4700
HP LJ4700n
HP LJ4700dn
HP LJ4700dtn
HP LJ4700ph+
Q7491A
Q7492A
Q7493A
Q7494A
Q7695A
11311 Chinden Blvd
Boise, ID 83714
Volatile Memory
Does the device contain volatile memory (Memory whose contents are lost when power is removed)?
Yes No If Yes please describe the type, size, function, and steps to clear the memory below
Type (SRAM, DRAM, etc): Size: Function: Steps to clear memory:
SDRAM DDR 128 MB n
256 MB
dn, dtn
512 MB
ph+
print job specific information, and
information stored in RAM disk
turn unit off, power unit back on
Type (SRAM, DRAM, etc): Size: Function: Steps to clear memory:
SDRAM 32 MB Pageframe video memory N/A
Type (SRAM, DRAM, etc): Size: Function: Steps to clear memory:
Non-Volatile Memory
Does the device contain non-volatile memory (Memory whose contents are retained when power is removed)?
Yes No If Yes please describe the type, size, function, and steps to clear the memory below
Type (Flash, EEPROM, etc): Size: Function: Steps to clear memory:
Compact Flash 32 MB Printer Firmware. Perform a cold reset as explained in
the service manual.
Type (Flash, EEPROM, etc): Size: Function: Steps to clear memory:
EEPROM (NVRAM) 64K Formatter PCA: page count,
configuration, PCA options, etc
Perform a cold reset as explained in
the service manual.
Type (Flash, EEPROM, etc): Size: Function: Steps to clear memory:
. .
Mass Storage
Does the device contain mass storage memory (Hard Disk Drive, Tape Backup)?
Yes No If Yes please describe the type, size, function, and steps to clear the memory below
Type (HDD, Tape, etc): Size: Function: Steps to clear memory:
Embedded HDD (ph+ bundle
only)
40GB Job, font, forms storage 1. Turn the printer on.
2. As the printer performs its power-
on sequence, press and hold the
Menu button until all three
lights on the control panel are lit.
3. Press the Reverse Arrow button.
The message INITIALIZE DISK
displays on the control panel.
4. Press the Down Arrow button. The
printer initializes the hard disk and
continues its power-on sequence.
Type (HDD, Tape, etc): Size: Function: Steps to clear memory:
HDD optional all others 40GB Job, font, forms storage 1. Turn the printer on.
2. As the printer performs its power-
on sequence, press and hold the
Menu button until all three
lights on the control panel are lit.
3. Press the Reverse Arrow button.
The message INITIALIZE DISK
displays on the control panel.
4. Press the Down Arrow button. The
printer initializes the hard disk and
continues its power-on sequence.