HP Color LaserJet 4700 - User Guide

2. Adjust the rear media-length guide by squeezing the guide adjustment latch and sliding the back

of the tray to the length of the media being used.

3. Slide the media-width guides open to the size for the media you are using.

4. Load media into the tray face up.

NOTE For best performance, load the tray completely full without splitting or fanning the

ream of paper. Splitting or fanning the ream might cause a multi-feed problem, which could

result in a paper jam. The capacity of the paper tray can vary. For example, if you are using

75 g/m

(20 lb) paper, the tray holds a full ream of 500 sheets. If the media is heavier than

75 g/m

(20 lb), the tray will not hold a full ream, and you must reduce the number of sheets

accordingly. Do not overfill the tray because the printer might not pick up the paper.

NOTE If the tray is not properly adjusted, the printer might display an error message or

the media might jam.

NOTE If you are duplex printing, see

Two-sided (duplex) printing for loading instructions.

104 Chapter 4 Printing tasks ENWW