HP Color LaserJet 4700 - Software Technical Reference (External)

Use the Graphics Mode feature to select one of the following settings:
●
Send Graphics as Vector. Select this setting to send graphics to the product as a
combination of HP Graphics Language, version 2 (HP-GL/2) and raster images. This setting
might produce higher-quality output. It is the default setting.
●
Send Graphics as Raster. Select this setting to send all graphics to the product as images
composed of individual dots. This setting might improve printing speed in some cases.
●
Alternative Letterhead Mode
When selected, this option eliminates the need to flip or reload letterhead or preprinted paper in a
paper tray, whether you are printing on one side of the sheet or both sides of the sheet. Load the
paper as you would for printing on both sides. If the printer tray has an icon that indicates to load
paper either face-up or face-down, load the paper opposite of the orientation shown.
When this option is selected, you must use one of the following options in the Type is setting:
●
Letterhead
●
Preprinted
NOTE Alternative Letterhead Mode is available only if the printer is equipped with an
automatic duplexing unit.
Layout Options
The Layout Options setting contains the Page Order setting.
Page Order specifies the order in which the pages of your document are printed. Front to Back prints
the document so that page 1 prints first. Back to Front prints the document so that page 1 prints last.
NOTE The page-ordering operation works on whole sheets of media rather than on individual
logical pages. Accordingly, if you set Pages per Sheet (on the Finishing tab) to be greater than
one, the ordering of logical pages on a physical sheet of media does not change.
170 Chapter 4 HP PCL 6, PCL 5, and PS emulation unidrivers for Windows ENWW
HP unidrivers for
Windows