HP Color LaserJet 4650 series printer - User Guide

To set the personality
1. Press M ENU to enter the MENUS.
2. Press
to highlight CONFIGURE DEVICE.
3. Press
to select CONFIGURE DEVICE.
4. Press
to highlight SYSTEM SETUP.
5. Press
to select SYSTEM SETUP.
6. Press
to highlight PERSONALITY.
7. Press
to select PERSONALITY.
8. Press
or to select the appropriate personality (AUTO, PCL, PDF, PS, MIME).
9. Press
to set the personality.
10. Press M
ENU .
Clearable warnings
You can determine the display time of control panel clearable warnings with this option by
selecting ON or JOB. The default value is JOB.
● ON displays clearable warnings until you press
.
● JOB displays clearable warnings until the end of the job in which it was generated.
To set the clearable warnings
1. Press M ENU to enter the MENUS.
2. Press
to highlight CONFIGURE DEVICE.
3. Press
to select CONFIGURE DEVICE.
4. Press
to highlight SYSTEM SETUP.
5. Press
to select SYSTEM SETUP.
6. Press
to highlight CLEARABLE WARNINGS.
7. Press
to select CLEARABLE WARNINGS.
8. Press
or to select the appropriate setting.
9. Press
to set the selection.
10. Press M
ENU .
Auto continue
You can determine printer behavior when the system generates an Auto Continuable error.
ON is the default setting.
● ON displays an error message for ten seconds before automatically continuing to print.
● OFF pauses printing any time the printer displays an error message and until you press
.
ENWW Changing printer control panel configuration settings 55