HP Color LaserJet 3000, 3600, 3800 series Printers - User Guide

●
Provides only pertinent information on the configuration page
●
Allows the printer control panel to display protocol-specific error and warning messages
To disable IPX/SPX
NOTE Do not disable this protocol in Windows-based systems that print to the printer using
IPX/SPX.
1. Press Menu.
2. Press
to highlight CONFIGURE DEVICE, and then press .
3. Press
to highlight I/O, and then press .
4. Press
to highlight EMBEDDED JETDIRECT, and then press .
5. Press
to highlight IPX/SPX, and then press .
6. Press
to select ENABLE.
7. Press
to highlight OFF, and then press .
8. Press Menu to return to the Ready state.
To disable AppleTalk
1. Press Menu.
2. Press
to highlight CONFIGURE DEVICE, and then press .
3. Press
to highlight I/O, and then press .
4. Press
to highlight EMBEDDED JETDIRECT, and then press .
5. Press
to highlight APPLETALK, and then press .
6. Press
to select ENABLE.
7. Press
to highlight OFF, and then press .
8. Press Menu to return to the Ready state.
To disable DLC/LLC
1. Press Menu.
2. Press
to highlight CONFIGURE DEVICE, and then press .
3. Press
to highlight I/O, and then press .
4. Press
to highlight EMBEDDED JETDIRECT, and then press .
5. Press
to highlight DLC/LLC, and then press .
6. Press
to select ENABLE.
7. Press
to highlight OFF, and then press .
8. Press Menu to return to the Ready state.
ENWW Network configuration 47