HP Color LaserJet 3000, 3600, 3800 series Printers - User Guide

6. Press or to select DISPLAY or DO NOT DISPLAY.
7. Press
to save the selected behavior, and then press Menu to return to the Ready state.
To set the Duplex Blank Pages feature
1. Press Menu.
2. Press
to highlight CONFIGURE DEVICE, and then press .
3. Press
to highlight SYSTEM SETUP, and then press .
4. Press
to highlight TRAY BEHAVIOR, and then press .
5. Press
to highlight DUPLEX BLANK PAGES, and then press .
6. Press
or to select AUTO or YES.
7. Press
to save the selected behavior, and then press Menu to return to the Ready state.
Sleep Delay and Sleep Mode features
The SLEEP DELAY feature determines how long the printer must be inactive before it switches to sleep
mode to reduce power consumption. You can set the length of time before the printer goes into sleep
mode to one of the following settings:
1 MINUTE
15 MINUTES
30 MINUTES (the default setting)
45 MINUTES
60 MINUTES
90 MINUTES
2 HOURS
4 HOURS
NOTE The printer display appears dimmed when the printer is in sleep mode. Sleep mode does
not affect printer warm-up time, unless the printer is in sleep mode for more than 8 hours.
To set the Sleep Delay feature
1. Press Menu.
2. Press
to highlight CONFIGURE DEVICE, and then press .
3. Press
to highlight SYSTEM SETUP, and then press .
4. Press
to highlight SLEEP DELAY, and then press .
5. Press
or to select the appropriate time period, and then press to set the selected time
period.
6. Press Menu to return to the Ready state.
36 Chapter 2 Control panel ENWW