HP Color LaserJet 3800 Printer - Software Technical Reference

Flip Pages Up
Use the Flip Pages Up check box is used to specify the duplex-binding option. By default, the Flip
Pages Up check box is not available. It is available only when Print on Both Sides is selected, The
following table demonstrates the results of selecting this check box, depending on the media orientation
selected on the Finishing tab.
Table 4-4 Page orientation
Orientation (Finishing tab) Flip Pages Up selected Flip Pages Up not selected
Portrait Short-edge binding Long-edge binding
Landscape Long-edge binding Short-edge binding
When Print on Both Sides is selected, the document preview image changes to show a spiral binding
along either the left edge or the top edge of the page. In addition, a folded-over corner appears in the
lower-right portion of the preview image, indicating that printing occurs on the back side. An arrow on
the folded-over corner points in the direction that the pages would be flipped if they were bound together.
Short-side binding is for print jobs with pages that read by flipping over like the pages of a calendar.
Long-side binding is for print jobs with pages that read by turning like the pages of a book.
Booklet layout
The Booklet Layout drop-down menu, visible when Print on Both Sides is selected, offers choices
that are based on the current media size. The default setting for the Booklet Printing drop-down menu
is Off. The other settings have the following format, where [paper size] depends on the media size that
is set on the Paper/Quality tab:
●
Left Edge Binding
●
Right Edge Binding
When you select Left Edge Binding or Right Edge Binding, the document preview image changes to
show the location of the binding. If the Pages per Sheet setting is on the default setting of 1, it
automatically changes to 2 pages per sheet. If you change the Pages per Sheet setting manually to
4, 6, 9, or 16 pages per sheet, the booklet setting is disabled. See the
Pages per Sheet section of this
chapter for more information.
Book and Booklet Printing
The HP Color LaserJet 3800 supports book and booklet printing.
A book is a print job consisting of at least two pages. It can have a different media type for the front
cover, first page, other pages, last page, or back cover. Use the Front Cover, First Page, Other Pages,
Last Page, and Back Cover settings on the Paper/Quality tab (available when you select the Use
Different Paper check box) to select different media for the front cover, first page, other pages, and
back cover. For more information, see
Paper/Quality tab features in this chapter.
A booklet is a print job that places two pages on each side of a sheet that can then be folded into a
booklet that is half the size of the media. Use the Booklet Layout drop-down menu on the Finishing
tab to control booklet settings.
236 Chapter 4 HP PCL 6, PCL 5, and PS emulation unidrivers for Windows ENWW