HP PCL/PJL reference (PCL 5 Printer Language) - Technical Reference Manual Part II

23-66 The Character Group EN
SA, Select Alternate Font
This command selects the alternate font (already designated by the
AD command) for subsequent labeling. Use the SA command to shift
from the currently selected standard font to the designated alternate
font.
SA [;]
The SA command tells the printer to draw subsequent labeling
commands using characters from the alternate symbol set previously
designated by the AD command. The SA command is equivalent
to using the Shift Out control character (SO, decimal 14) within a
label string.
The default designated alternate font uses symbol set 277
(Roman-8). The alternate font remains in effect until an SS
command is executed, a Shift In control character (SI, decimal
15) is encountered, or the printer is initialized or set to default
conditions.
Table 23-36
Related Commands Group
CP, Character Plot The Character Group
DV, Define Variable Text Path
LB, Label
Table 23-37
Related Commands Group
AD, Alternate Font Definition The Character Group
DT, Define Label Terminator
FI, Select Primary Font
FN, Select Secondary Font
LB, Label
SD, Standard Font Definition
SS, Select Standard Font