HP Color LaserJet 3000 Printer - Software Technical Reference

The Job Name field can contain no more than 16 characters, and is limited to A through Z (uppercase
or lowercase) and 0 through 9 so that the name can appear on the product control-panel display. If you
try to type a character in an ASCII code of fewer than 32 or more than 126 characters, the character is
removed from the edit field, along with all of the characters that follow it. If you try to type more than 16
characters, any character beyond 16 is truncated.
When the dialog box is closed, or as soon as the focus is removed from the control (that is, when the
Tab key is pressed or another control is selected), an empty string is replaced with <Automatic>. The
acceptable characters for job name and user name vary for each operating system. The string must be
of a length and type that can appear on the product control-panel display.
If Job Name Exists. When you store a print job, you can create a print-job name or the product software
can assign one automatically. If a print job with the same name already exists, the new print job will
overwrite the existing print job. To eliminate the chances of a new print job overwriting an old print job
because both have the same name, select Use Job Name + (1-999). After you create the print job name,
or when one is created automatically, the product software assigns a number between 1 and 999 to the
end of the print job name to make the name unique. Select Replace Existing File if you always want
the product software to overwrite an existing print job with the same print job name.
Using job-storage features when printing
To use job-storage features when printing, follow these steps:
1. Click File and then click Print from the software program. The Print dialog box appears.
NOTE Clicking the print icon in the software program toolbar prints the job without using
job-storage features.
2. Click Properties. The Properties dialog box appears.
3. Click the Job Storage tab.
4. Select the job-storage options by clicking the appropriate option button, and then complete any
required fields.
5. Click OK.
Releasing a job-storage print job
After you send a print job that uses the job-storage feature, you can release the job to print from the
product control panel.
1. Press
(the select button; the one with the check mark) to open the menus.
2. Press
(the up button) and (the down button) until RETRIEVE JOB is highlighted on the product
control panel, and then press
.
3. Press
and to scroll to your user name, and then press .
4. Press
and to scroll to the job name, and then press .
5. Press
and until PRINT is highlighted on the product control panel, and then press .
6. Press
.
7. If a PIN number is assigned to the job, press
and to select the first digit of the PIN, and then
press
. The number in the product control-panel display changes to an asterisk. Repeat this
step for each of the remaining three digits of the PIN number.
148 Chapter 3 HP traditional print drivers for Windows ENWW