HP Color LaserJet 3000 Printer - Software Technical Reference

●
Colored
●
Rough
Cardstock media can be manually printed on the second side, but no change occurs to the print mode.
Transparencies and labels should not be manually printed on the second side.
To print a multiple-page document, follow these steps:
1. Select the Print on Both Sides (Manually) check box.
2. Click OK. The even-number pages of the document print.
3. When the control panel shows the MANUALLY FEED message, insert the stack of media (on which
the even-number pages have been printed) as indicated in the following figure.
Figure 3-4 Print on Both Sides Instructions dialog box
When you have completed the steps that appear in the dialog box, the second half of the print job prints
on the back side of the stack of media. The driver does not require the program to specifically support
odd- and even-page printing, because the driver coordinates this function.
Flip Pages Up
Use the Flip Pages Up check box, which is available only when Print on Both Sides is selected, to
specify the duplex-binding option. By default, the Flip Pages Up check box is not available. The following
table demonstrates the results of selecting this check box, depending on the media orientation that is
selected on the Basics tab.
112 Chapter 3 HP traditional print drivers for Windows ENWW