HP Jetdirect Print Servers - Administrator Guide

ENWW TCP/IP Configuration 55
pri-wins-svr:
The IP address of the primary Windows Internet Name Service (WINS) server.
sec-wins-svr:
The IP address of the secondary Windows Internet Name Service (WINS) server.
smtp-svr:
The IP address of the outgoing e-mail Simple Mail Transport Protocol (SMTP)
server, for use with supported Scan devices.
TCP/IP Print Options
9100-printing:
Enables or disables printing to TCP port 9100 on the print server. 0 disables,
1 (default) enables.
ftp-printing:
Enables or disables the ability to print through FTP: 0 disables, 1 (default) enables.
ipp-printing:
Enables or disables the ability to print through IPP: 0 disables, 1 (default) enables.
lpd-printing:
Enables or disables LPD (Line Printer Daemon) printing services on the Jetdirect
print server. 0 disables, 1 (default) enables.
banner:
A port-specific parameter that specifies printing an LPD banner page. 0 disables
banner pages. 1 (default) enables banner pages.
interlock:
Specifies whether an acknowledgement (ACK) on all TCP packets is required
before the printer is allowed to close a Port 9100 print connection. To
accommodate multiport print servers, a Port Number and Option value are
specified. Port Numbers can be 1 (default), 2, or 3. Option value 0 (default)
disables interlock, 1 enables. For example,
“interlock 2 1” specifies Port 2, interlock enabled.
buffer-packing:
Enables or disables buffer packing for TCP/IP packets.
0 (default): is normal, the data buffer is packed before sending to the printer.
1: disables buffer packing, data is sent to the printer as it is received.
Table 3.3 TFTP Configuration File Parameters (2 of 10)