HP Jetdirect Print Servers - Administrator Guide

ENWW Using the Embedded Web Server 149
Access Control
Use this tab to display the Access Control List (ACL) on the
HP Jetdirect print server. An access control list (or host access list)
specifies individual host systems, or networks of host systems, that
will be allowed to access the print server and the attached network
device. Up to 10 entries can be included on the list. If the list is
empty (no hosts are listed), any supported system can access the
print server.
Install a PEM/Base64 (Privacy Enhanced Mail) encoded certificate.
To install a certificate, specify the name and path of the file that contains the
certificate. Or, click Browse to browse your system for the file.
Click Finish to complete the installation.
To install a certificate, it must be associated with a pending certificate request by
the embedded Web server. The Install Certificate option will not be presented if
there is no pending request.
A Jetdirect or CA certificate size is limited to 3 KBytes.
Import Certificate and Private Key
Use this screen to import a Jetdirect certificate and private key.
Import a Jetdirect certificate and private key. When imported, the existing
certificate and private key will be overwritten.
The file format must be PKCS#12 encoded (.pfx) and cannot exceed 4 KBytes.
To import a certificate and private key, specify the name and path of the file that
contains the certificate and private key. Or, click Browse to browse your system
for the file. Then enter the password that was used to encrypt the private key.
Click Finish to complete the installation.
Export the Jetdirect certificate and private key.
Use this screen to export the installed Jetdirect certificate and private key to a file.
To export a certificate and private key, enter a password that will be used to
encrypt the private key. You must enter the password again to confirm it. Then
click Save As to save the certificate and private key in a file on your system. The
file format will be PKCS#12 encoded (.pfx).
Table 4.12 Certificate Configuration Screens (4 of 4)