Emulex OneCommand Manager Command Line Interface User Manual (P006980-01A Version 5.2, August 2011)

OneCommand Manager Command Line Interface User Manual Page 39
BeaconState - New state of the beacon:
0 = Off
1= On
SetCableNVP
Supported by: Windows, Solaris, Linux and VMware ESX
Syntax:
hbacmd SetCableNVP <WWPN|MAC> <NVP>
Description: This command sets the nominal velocity of propagation (N-V-P), required for the TDR test,
for the cable that connects to the phyical port associated with the WWPN or MAC.
Parameters:
WWPN - WWPN of the FC port
MAC - MAC address of the NIC or iSCSI port
NVP - A percentage value between 1 and 100 (Consult your cable documentation to obtain the
proper NVP value)
Wakeup
Supported by: Windows, Solaris, Linux and VMware ESX
Syntax:
hbacmd Wakeup <WWPN>
Description: This command wakes up the adapter.
Parameters:
WWPN - Adapter’s WWPN
Note: This command supports only OneConnect OCe11100 series adapters.
Note: Not supported for OneConnect adapters.