DCFM Installation, Migration, and Transition Guide - Supporting DCFM 10.3.x (53-1001360-01, October 2009)

DCFM Installation, Migration, and Transition Guide 183
53-1001360-01
Migrating from Enterprise edition 10.0.X on UNIX systems
2
12. Enter the serial number (located on the DVD jewel case) and license key (located on the Key
Certificate) on the Server License screen or browse to the license file (.xml) and click Next.
The License Key field is not case-sensitive.
13. Select Internal FTP Server or External FTP Server on the FTP Server screen and click Next.
The default selection reflects the previous Enterprise configuration.
If port 21 is busy, a message displays. Click OK to close the message and continue. Once the
Management application is configured make sure port 21 is free and restart the Server to start
the FTP service.
NOTE
If you select to use an FTP Server which is not configured on the same machine as DCFM, the
Firmware Repository feature will not be available.
14. Complete the following steps on the Server IP Configuration screen.
FIGURE 81 Server IP Configuration screen
a. Select an address from the Client - Server IP Configuration Return Address list.
b. Select an address from the Switch - Server IP Configuration Preferred Address list.
c. Click Next.
If DNS is not configured for your network, do not select the ‘hostname’ option from either
the Return Address or Preferred Address list. Selecting the ‘hostname’ option prevents
clients and devices from communicating with the Server.
If you select a specific IP address from the Server IP Configuration screen and the selected
IP address changes, you will not be able to connect to the server. To change the IP
address, refer to “Configuring an explicit server IP address” on page 60.