Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

836 Fabric OS Message Reference
53-1002448-01
SEC-3046
134
SEC-3046
Message <Sequence Number> AUDIT, <timestamp>, [SEC-3046], INFO, SECURITY,
<event-initiator-details>, <event-location>, The FIPS Self Tests mode has been set
to <Self Test Mode>.
Probable Cause Indicates there was a change in the FIPS Self Test mode.
Recommended
Action
Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security
policy.
Severity INFO
SEC-3047
Message <Sequence Number> AUDIT, <timestamp>, [SEC-3047], INFO, SECURITY,
<event-initiator-details>, <event-location>, Info: RBAC permission for a CLI
command: <Cmd Name> is failed.
Probable Cause Indicates the user does not have permission to execute this command.
Recommended
Action
Verify the user has the required permission to execute this command.
Severity INFO
SEC-3048
Message <Sequence Number> AUDIT, <timestamp>, [SEC-3048], INFO, SECURITY,
<event-initiator-details>, <event-location>, FIPS mode has been enabled in the
system using force option.
Probable Cause Indicates the system has been forced to FIPS mode.
Recommended
Action
Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security
policy.
Severity INFO
SEC-3049
Message <Sequence Number> AUDIT, <timestamp>, [SEC-3049], INFO, SECURITY,
<event-initiator-details>, <event-location>, Status of bootprom access is changed
using fipscfg CLI to: <Access Status>.
Probable Cause Indicates the status of bootprom access is changed using the fipscfg command.