Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

778 Fabric OS Message Reference
53-1002448-01
AUTH-3001
118
Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command
and contact your switch service provider.
Severity ERROR
AUTH-3001
Message <Sequence Number> AUDIT, <timestamp>, [AUTH-3001], INFO, SECURITY,
<event-initiator-details>, <event-location>, , Event: <Event Name>, Status:
success, Info: <Data type> type has been changed from [<Old value>] to [<New
value>].
Probable Cause Indicates that an authentication configuration value was set to a specified value. The data type can
be either authentication type, DH group type, Hash type or policy type.
Recommended
Action
No action is required.
Severity INFO
AUTH-3002
Message <Sequence Number> AUDIT, <timestamp>, [AUTH-3002], INFO, SECURITY,
<event-initiator-details>, <event-location>, , Event: <Event Name>, Status:
success, Info: <Event Related Info>.
Probable Cause Indicates that the secret database operation has been updated using the secAuthSecret
command.
Recommended
Action
No action is required.
Severity INFO
AUTH-3003
Message <Sequence Number> AUDIT, <timestamp>, [AUTH-3003], INFO, SECURITY,
<event-initiator-details>, <event-location>, , Event: <Event Name>, Status:
success, Info: <Operation type> the PKI objects.
Probable Cause Indicates that the public key infrastructure (PKI) objects were created using the pkiCreate
command or that the PKI objects were removed using the pkiRemove command. The Operation
Type can be either “Created” or “Removed”.
Recommended
Action
No action is required.
Severity INFO