Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

Fabric OS Message Reference lxxxv
53-1002448-01
• syslog message logs
2. Switch Serial Number
The switch serial number and corresponding bar code are provided on the serial number label,
as illustrated below.
The serial number label is located as follows:
• Brocade 300, 5100, 5300, 6505, 6510, 7800, 8000, VA-40FC, and Brocade Encryption
Switch—On the switch ID pull-out tab located inside the chassis on the port side on the left
• Brocade 5410, 5424, 5450, 5460, 5470, 5480—Serial number label attached to the
module
• Brocade DCX and DCX 8510-8—On the port side of the chassis, on the lower right side and
directly above the cable management comb.
• Brocade DCX-4S and DCX 8510-4—On the nonport side of the chassis, on the lower left
side.
3. World Wide Name (WWN)
Use the licenseIdShow command to display the WWN of the chassis.
If you cannot use the licenseIdShow command because the switch is inoperable, you can get
the WWN from the same place as the serial number, except for the Brocade DCX. For the
Brocade DCX, access the numbers on the WWN cards by removing the Brocade logo plate at
the top of the nonport side of the chassis.
Document feedback
Quality is our first concern at Brocade and we have made every effort to ensure the accuracy and
completeness of this document. However, if you find an error or an omission, or you think that a
topic needs further development, we want to hear from you. Forward your feedback to:
[e-mail]
Provide the title and version number of the document and as much detail as possible about your
comment, including the topic heading and page number and your suggestions for improvement.