Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, April 2009)

148 Fabric OS Command Reference
53-1001186-01
cryptoCfg
2
-cfg | -stat Displays either configuration information or runtime status for the
specified tape pools.
--show -LUN Displays Crypto LUN configuration or runtime status information for a
specified CTC. This command is valid on all nodes. The following operands
are supported:
crypto_target_container_name
Specifies the CTC for which to display the Crypto LUN information.
LUN_Num Specifies the number of the LUN for which to display information.
initiator_PWWN Specifies the PWWN of the initiator.
-cfg | -stat Displays either the configuration or the status of the specified Crypto LUN.
The configuration can be displayed on any node in the encryption group. To
display LUN status, the specified LUN must be hosted on the local node.
--show -rekey Displays information about re-key sessions in progress. This command is
valid on all nodes. The following operands are mutually exclusive:
-all Lists all re-key sessions in progress in the current encryption group.
crypto_target_container_name
Lists all re-key sessions in progress for a specified CryptoTarget container.
You may further specify either one of the following operands:
LUN_Num Lists all re-key sessions in progress for a specific Crypto LUN of the
specified CryptoTarget container.
initiator_PWWN Lists all re-key sessions in progress for a specific initiator of the specified
CryptoTarget container.
--show -tape_sessions
Displays runtime tape session information. This command is valid on all
nodes. The following operands are mutually exclusive:
-all Displays runtime information for all tape sessions in progress on the local
node.
crypto_target_container_name
Displays runtime information for all tape sessions in progress for a specified
CryptoTarget container.
Function 5. Transaction management
Synopsis cryptocfg --help transcfg
cryptocfg --commit [-force]
cryptocfg --transabort transaction_ID
cryptocfg --transshow