Brocade Fabric Manager Administrator's Guide v6.1.0 (53-10000610-02, June 2008)

370 Fabric Manager Administrator’s Guide
53-10000610-02
Device port
B
Device port
CIM uses an FCPort class and a ProtocolEndPoint class for device ports. Fabric Manager provides a
CIM_FCPort view for the FCPort class. This view also contains rows for switch ports. See “Switch
port” on page 368 for information on the CIM_FCPort view.
Fabric Manager does not have a view for the ProtocolEndPoint class.
Zone_config
The zone configuration is represented in CIM by ZoneSet. The zone_config in the Fabric Manager
database determines the following record types:
• config
• zone
• alias
• quickloop
Use CIM_ZoneSet to access the Fabric Manager information.
Zone
A zone is represented in CIM by Zone. Fabric Manager contains a CIM_Zone view in its database
and is defined by the following table.
Unused 1
Warning 4
Faulty No_Sync, 6
Disabled Disabled, Disabled (FMS mode) null
TABLE 30 Port status mapping (Continued)
API port status WT port status (switch_port. port_status) Operational status (CIM)
TABLE 31 CIM_ZoneSet view
Column Type Qualifier Description Database equivalent Example
Dbid Int Key Database key, used for joins to
replace traversal of associations.
Zone_config.dbid 1
Fabric_id Int Key of fabric. Zone_config.fabric_id 2
ElementName String Name of zone config. Zone_config.name where
config_type=1
LSAN_cfg
Active Int Small Boolean, 1 for enabled config. Zone_confg.config_state=1 1